January 22, 2010 Succesful Heimtextil
From 13 till 16 januari of this year Thomas Regout B.V. presented it’s new developments and innovations at The International trade fair for home and contract textiles, The Heimtextil in Frankfurt.
During these four days, the traide fair was the platform for manufacturers, trade and designers in the sector of home decorations. The theme of this year was ‘take a walk on the style side’ and Thomas Regout showed it’s latest innovations, like the new Roman Blind (Romatech), the motorised flat panel track and the new 38 mm pole range.
If you have any questions about our latest products, please do not hesitate to contact us by e-mail or phone: +31 (0) 43 351 66 66.
News archive
January 20, 2010 Revolutionary new blind system Romatech
We are proud to introduce the revolutionary new blind system Romatech. This sixfold patented system enables you to introduce a quality blind range without any sewing and with an extremely low start up cost. It’s suitable for almost every Roller Blind.
The revolutionary Romatech System enables any workroom, no matter how large or small, to introduce a quality Roman Blind range. With the use of the Patented Romatech Applicators and Aluminium Profiles the system is simple and efficient to assemble. Add to this the Romatech Twist Rings, the special End Caps and with the minimum of skill you can produce the highest quality Roman Blind in as little as 15 minutes.
In summary, the Romatech System has been specifically designed to:
We are proud to introduce the revolutionary new blind system Romatech. This sixfold patented system enables you to introduce a quality blind range without any sewing and with an extremely low start up cost. It’s suitable for almost every Roller Blind.
The revolutionary Romatech System enables any workroom, no matter how large or small, to introduce a quality Roman Blind range. With the use of the Patented Romatech Applicators and Aluminium Profiles the system is simple and efficient to assemble. Add to this the Romatech Twist Rings, the special End Caps and with the minimum of skill you can produce the highest quality Roman Blind in as little as 15 minutes.
In summary, the Romatech System has been specifically designed to:
- eliminate Stitch holes eliminate fabric snagging, lining tearing and misalignment of the batten
- eliminate the need for skilled (sewing) labour
- minimize manufacturing times
- create a modern and elegant stylized blind
The Romatech system is suitable for the professional market, project designers, sewing workshops, wholesale and architects. Please contact our sales department for more information about this unique concept or download our leaflet here.
January 8, 2010 Newsletter Thomas Regout B.V.
To keep our customers up to date on all developments within Thomas Regout B.V., we have developed a newsletter. A couple of times a year we will inform you about our latest innovations, product changes and recent developments. If you are interested in our latest newsletter please click here.
To keep our customers up to date on all developments within Thomas Regout B.V., we have developed a newsletter. A couple of times a year we will inform you about our latest innovations, product changes and recent developments. If you are interested in our latest newsletter please click here.
January 6, 2010 New 38mm program
Thomas Regout B.V. has expanded her program of curtain poles with a complete new extensive 38mm pole range, including brackets, rings and finials. This program is available in four colors; stainless steel effect, shiny chrome, shiny antique and shiny black gun. There is also the possibility to order it in complete sets jetran packaging.For more information please contact our sales department.
Thomas Regout B.V. has expanded her program of curtain poles with a complete new extensive 38mm pole range, including brackets, rings and finials. This program is available in four colors; stainless steel effect, shiny chrome, shiny antique and shiny black gun. There is also the possibility to order it in complete sets jetran packaging.For more information please contact our sales department.
January 6, 2010 Cooperation with SPP Industries
Thomas Regout B.V. is very proud to announce its close cooperation and agreement with SPP Industries Australia and Europe for the sales and distribution as well as the production and extrusion of profiles, of the revolutionary new blind system Romatech in Europe. This sixfold patented and registered system enables you to manufacture roman blinds without additional skills, tooling or sewing machinery. Please contact us for more information about this unique concept or click here to download our leaflet. At the upcoming Heimtextil show (Frankfurt from 13 – 16. 1- 2010, Hall 4.2, stand F17) we will demonstrate this full concept and its possibilities together with our other new products and developments.
Thomas Regout B.V. is very proud to announce its close cooperation and agreement with SPP Industries Australia and Europe for the sales and distribution as well as the production and extrusion of profiles, of the revolutionary new blind system Romatech in Europe. This sixfold patented and registered system enables you to manufacture roman blinds without additional skills, tooling or sewing machinery. Please contact us for more information about this unique concept or click here to download our leaflet. At the upcoming Heimtextil show (Frankfurt from 13 – 16. 1- 2010, Hall 4.2, stand F17) we will demonstrate this full concept and its possibilities together with our other new products and developments.
November 12, 2009 - Heimtextil 2010
Like every year, Thomas Regout will be present at the Heimtil in Frankfurt in 2010. The International trade fair for home and contract textiles will take place from 13 till 16 January 2010 at the Messe Frankfurt. During these four days, the trade fair will be the platform for manufacturers, trade and designers in the sector of home decorations. This year’s theme is “take a walk on the style side”. Thomas Regout will be present with the necessary style and innovations. Just like last year, we will present some new developments and innovations. We hope to welcome you to our stand in Hall 4.2 stand F17! For more information on the fair visit http://www.heimtextil.messefrankfurt.com
Like every year, Thomas Regout will be present at the Heimtil in Frankfurt in 2010. The International trade fair for home and contract textiles will take place from 13 till 16 January 2010 at the Messe Frankfurt. During these four days, the trade fair will be the platform for manufacturers, trade and designers in the sector of home decorations. This year’s theme is “take a walk on the style side”. Thomas Regout will be present with the necessary style and innovations. Just like last year, we will present some new developments and innovations. We hope to welcome you to our stand in Hall 4.2 stand F17! For more information on the fair visit http://www.heimtextil.messefrankfurt.com
October 30, 2009 - ISO TS 16949
We are proud to announce that we have completed the audit succesfully and that we will receive the ISO TS 16949 certificate for the coming three years.
ISO/TS 16949 is the only standard recognized worldwide. It is related to quality management as it applies to any organization active in the automotive/motorcycle supply chain. It is based on the eight quality management principles (all fundamental to good business practice): Customer focus, Leadership, Involvement of people, Process approach, System approach to management, Continual improvement, Fact based decision-making, Mutually beneficial supplier relationships and fulfilment of customer specific requirements.
We have gained this certificate in 2006 in order to focus on the automotive segment. There is a 3 yearly check up by an independent company that are able to decide whether you fulfil all requirements and whether there were improvements during the last 3 years. We are proud to announce that we have completed the audit successfully and that we will receive the ISO TS 16949 certificate for the coming three years. Thomas Regout is constantly busy to add value to the quality management system. Besides the ISO/TS 16949 we already have the ISO 9001 (quality standards for the telescopic slides) and the ISO 14001 (the environment).
We are proud to announce that we have completed the audit succesfully and that we will receive the ISO TS 16949 certificate for the coming three years.
ISO/TS 16949 is the only standard recognized worldwide. It is related to quality management as it applies to any organization active in the automotive/motorcycle supply chain. It is based on the eight quality management principles (all fundamental to good business practice): Customer focus, Leadership, Involvement of people, Process approach, System approach to management, Continual improvement, Fact based decision-making, Mutually beneficial supplier relationships and fulfilment of customer specific requirements.
We have gained this certificate in 2006 in order to focus on the automotive segment. There is a 3 yearly check up by an independent company that are able to decide whether you fulfil all requirements and whether there were improvements during the last 3 years. We are proud to announce that we have completed the audit successfully and that we will receive the ISO TS 16949 certificate for the coming three years. Thomas Regout is constantly busy to add value to the quality management system. Besides the ISO/TS 16949 we already have the ISO 9001 (quality standards for the telescopic slides) and the ISO 14001 (the environment).
July 31, 2009 Bending tools A5000 - A5300 - A6000
In order to continuously provide you with instruments of good quality, we are optimizing our bending tools. The bending tool for our systems A5000, A5300 and A6000, has undergone a make-over.
Where there used to be one bending tool for these 3 systems, we now have 2 separate tools. One for system A5000/A5300 and one for system A6000. These new bending tools guarantee a more precise curve and prevent deformation of the rail.
Both bending tools consist of bending pliers, a bending inlay and bending strips. The bending pliers are universal and can be used for both systems. The bending inlay you should use depends on the rail. There is one tool for the A5000 and A5300 and one for the A6000. The bending strips, however, are specific for each rail individually.
An overview of the new article numbers:
A5000/A5300 bending tool
2500029 Bending pliers
2500034 Bending inlay A5000/A5300
2500036 Bending strip runner/glider chanel of A5000, A5300 and A6000
2500037 Bending strip A5300
2500038 Bending strip A5000
2500035 Complete Bending tool A5000/A5300 (incl. bending strips)
A6000 bending tool
2500029 Bending pliers
2600054 Bending inlay A6000
2500036 Bending strip runner/glider chanel of A5000, A5300 and A6000
2600055 Complete Bending tool A6000 (incl. bending strip)
For more information, you can always contact us.
In order to continuously provide you with instruments of good quality, we are optimizing our bending tools. The bending tool for our systems A5000, A5300 and A6000, has undergone a make-over.
Where there used to be one bending tool for these 3 systems, we now have 2 separate tools. One for system A5000/A5300 and one for system A6000. These new bending tools guarantee a more precise curve and prevent deformation of the rail.
Both bending tools consist of bending pliers, a bending inlay and bending strips. The bending pliers are universal and can be used for both systems. The bending inlay you should use depends on the rail. There is one tool for the A5000 and A5300 and one for the A6000. The bending strips, however, are specific for each rail individually.
An overview of the new article numbers:
A5000/A5300 bending tool
2500029 Bending pliers
2500034 Bending inlay A5000/A5300
2500036 Bending strip runner/glider chanel of A5000, A5300 and A6000
2500037 Bending strip A5300
2500038 Bending strip A5000
2500035 Complete Bending tool A5000/A5300 (incl. bending strips)
A6000 bending tool
2500029 Bending pliers
2600054 Bending inlay A6000
2500036 Bending strip runner/glider chanel of A5000, A5300 and A6000
2600055 Complete Bending tool A6000 (incl. bending strip)
For more information, you can always contact us.
July 13, 2009 50 Best Managed Companies
For the second year in a row, Thomas Regout kept its title as one of Netherlands’ best managed companies. The award “50 best managed companies” is granted by Deloitte. The strategy and management of the companies are the primary focus during this competition. But the financial results are taken into consideration as well.
During the competition we presented our vision on multiple management aspects: Strategy, Human Resources, Internal Organisation, Marketing & Sales and Risk management. The jury of professionals also paid attention to issues like environmentally friendly entrepreneurship. On 25 June, our management team received the award on behalf of the entire workforce of Thomas Regout. Thomas Regout is really proud of it’s employees. The pleasant and professional working environment is the result of managing the company in the right way. With this award, Deloitte has rewarded us for our great efforts.
For the second year in a row, Thomas Regout kept its title as one of Netherlands’ best managed companies. The award “50 best managed companies” is granted by Deloitte. The strategy and management of the companies are the primary focus during this competition. But the financial results are taken into consideration as well.
During the competition we presented our vision on multiple management aspects: Strategy, Human Resources, Internal Organisation, Marketing & Sales and Risk management. The jury of professionals also paid attention to issues like environmentally friendly entrepreneurship. On 25 June, our management team received the award on behalf of the entire workforce of Thomas Regout. Thomas Regout is really proud of it’s employees. The pleasant and professional working environment is the result of managing the company in the right way. With this award, Deloitte has rewarded us for our great efforts.
